Silvercrest SFW 350 D3, Operating Instructions Manual

Page: 34 / 166

SFW 350 D3
GB
│
IE
│ 31 ■
5) Place your selected cutting disc
r
into the meat grinder casing
6
so that
the fixings on the cutting disc
r
are located in the openings in the meat
grinder casing
6
.
6) After everything has been correctly assembled, screw the ring clamp
t
back on hand-tight .
7) The ready-assembled meat grinder ca sing
6
is connected by a bayonet
connector to the motor unit
5
:
– Insert the meat grinder casing
6
into the motor unit
5
such that the
arrow on the meat grinder casing
6
lies against the symbol on the
motor unit
5
. The locking button
o
presses itself in (Fig . B) .
– Lightly press the meat grinder casing
6
in and at the same time turn
the feeding shaft on the meat grinder casing
6
into the middle position
(Fig . B) so that the arrow on the feeding shaft points to the symbol .
When the meat grinder casing
6
engages, the locking button
o
springs out .
– Finally, place the feeding tray
3
on top of the feeding funnel .
– To dismantle it, press the locking button
o
and turn the feeding funnel
to the right (Fig . B) . You can now pull the meat grinder casing
6
out .
Assembling the sausage stuffer attachment
Unfold the fold-out side - there you will find the step-by-step illustrations for as-
sembling the appliance .
1) Remove the meat grinder casing
6
as described under “Assembling the
meat grinder” .
2) Dismantle all parts which are fitted to/in the meat grinder casing
6
and
clean them .
3) Coat all metal parts with cooking oil .
4) Put the transport screw
q
, the spring
w
and the cross blade
e
back into
the meat grinder casing
6
.
5) Insert the sausage disc
u
so that the fixings on the sausage disc
u
are
located in the openings in the meat grinder casing
6
.
6) Then place the sausage stuffer attachment
z
before the sausage disc
u
.
7) Screw the ring clamp
t
on hand-tight .
8) Assemble the meat grinder casing
6
as described under “Assembling the
meat grinder” .
IB_314659_SFW350D3_LB8.indb 31 21.01.19 14:53