SGR 150 B2
GB
│
MT
│
61
■
Initial operation
WARNING! RISK OF INJURY!
►
Always switch off the appliance and remove the mains plug from the mains
socket before assembling or disassembling the appliance and fitting or
changing accessories . Wait until the motor stops completely .
►
Do not connect the appliance to the mains until it has been completely
assembled .
►
Be careful when handling the drums
2 3 4 5 0
.
The blades are very sharp!
♦
Before first use, clean all parts of the appliance as described in the section
Cleaning
.
♦
Pull the power cable fully out of the cable storage compartment
7
.
♦
Set up the appliance on a level, dry and non-slip surface .
♦
Fit the drum housing
9
:
–
Insert the drum housing
9
so that the arrow ▸ on the drum housing
9
points to the open lock symbol
on the appliance .
–
Turn the drum housing
9
anticlockwise so that the feed tube
q
points
upwards and the arrow ► on the drum housing
9
points to the closed
lock symbol on the appliance . The drum housing
9
engages
noticeably .
–
Insert the pusher
w
into the feed tube
q
.
♦
Insert a drum
2 3 4 5 0
into the drum housing
9
, as described in the
section
Inserting/removing a drum
.
♦
Carefully stack the remaining drums in the storage container
6
and close
the lid
1
. Slide the storage container
6
from above onto the locking
device at the rear end of the appliance .
♦
Insert the plug into a suitable mains socket .
The appliance is now ready for use .
Summary of Contents for 311001
Page 3: ...6 3 4 5 1 8 2 7 9 0 q w e ...
