12
13
silvercrossbaby.com
Operating the swivel wheels
10.1
Your 3D has lockable swivel wheels. By
pressing the locking catch down the
wheels will lock in the fixed position. By
lifting this up the wheels will freely swivel
for easier steering.
You should always lock the wheels on
uneven surfaces, and before folding.
Using your hood
11.1
Your 3D hood fits on the 3D facing both
directions, rearwards for the pram mode
and forwards for pushchair mode. Press
down on the hood arms to tension the
hood.
Using your liner
12.1
Your 3D liner has a Soft Wrap™ to
help provide your child with a safe and
comfortable position. Open the wrap
completely, place your child in the
centre of the Soft Wrap™ and close the
waist and crotch pads, securing with the
velcro tabs.
12.2
If you wish to attach a separate harness
D-rings can be accessed at the sides of
liner.
WARNING: Use a harness
as soon as your child can sit
unaided.
NOTE: Always use the
harness provided when in
pushchair mode
Your pram system liner can be washed
(please refer to washcare labels), it is
recommended that the mattress and
side supports are removed by accessing
from the base of the liner.
Using your raincover
13.1
To attach the raincover, first slide over
the 3D Pram System handles and pass
over the hood. Then fasten the velcro
flap at the rear.
13.2
Pull the raincover over the 3D at both
ends. Loop the velcro straps at the front
around the 3D leg, just below the foot
plate, and fasten. The raincover is now
fitted.
13.3
Your 3D Pram System raincover is
designed to fit the 3D in either pram or
pushchair mode. The raincover however
is not designed to fit when the Ventura
Plus car seat is fitted to the 3D. A
separate raincover can be purchased for
this purpose.
10.1
11.1
12.1
12.2
13.1
13.2
13.3
