14
15
silvercrossbaby.com
Folding your 3D
Your 3D will fold with and without the
pram system liner fitted. It is easier
without the liner in position, and we
would therefore recommend removing it
before folding.
Note: To ensure your 3D folds
correctly remove all items from the
shopping basket before attempting
to fold.
Note: If the liner is left in place and
folded for a long period, then the
foam mattress will curve upwards.
This will then regain its normal flat
shape once a baby is placed in the
liner.
Note: If using as a travel system
please ensure that the Ventura Plus
car seat is removed before folding.
14.1
Before commencing the fold apply the
brake. Then lift the seat back into the
upright position (if in pram system make
sure you push the apron part upright)
lock the swivel wheels and ensure the
hood is fully folded back.
This is very important.
14.2
Next, gently Pull the 2 finger catches
simultaneously upwards (numbered 1)
until you hear the click and reveal the
red exclamation marks. Now press
down gently on the main pushchair
handles to disengage the main front
locks.
Folding your 3D
14.3
Rotate the red rotation lever (numbered
2) so it’s horizontal. Pull gently upwards
and the 3D will begin to fold. This lever
is not a carry handle.
Note: Do not force or over rotate
the red rotation lever, this may
cause damage to your pushchair.
14.4
Pushing on the handle and lifting the
red rotation lever
will help your 3D to
fold easily.
14.5
Rock the pushchair onto the front wheels
and push downwards. Your 3D will lock
together.
14.6
From time to time it may be necessary
to lock your 3D by pressing the legs
together until the 3D locks. This is
perfectly normal.
NOTE: When folding your 3D in pram
mode, please ensure that the apron (seat
back) has been raised to the upright
position (see point 7.3), then proceed
with points 14.1 - 14.5.
NOTE: Silver Cross advises that the
apron is removed before folding in pram
mode.
14.1
14.2
14.3
14.4
14.5
14.6
Lock
