Silicon Graphics Total Performance 9300, User Manual

Page: 14 / 120

xiv 007-4644-001
About This Guide
Danger:
Never look into the end of a fiber-optic cable on a powered device with any
type of magnifying device, such as a microscope, eye loupe, or magnifying glass. Such
activity causes a permanent burn on the retina of the eye. Optical signals cannot be
verified by looking into the fiber end.
Chapter Descriptions
This guide contains the following chapters:
• Chapter 1, “Introduction to the SGI TP9300,” describes the features and components
of the system.
• Chapter 2, “Storage Enclosures,” gives a detailed overview of the system enclosure
and its components.
• Chapter 3, “Operating Storage Enclosures,” describes the functions and basic
operation of the system enclosures, including power on and troubleshooting with
the indicator lights.
• Chapter 4, “Replacing Enclosure Components,” gives detailed procedures for
replacing failed components.
• Chapter 5, “Cabling,” describes cabling between controller and expansion
enclosures and between controllers and hosts.
• Appendix A, “Specifications and Requirements,” describes component
specifications and requirements for purposes of installation and maintenance.
• Appendix B, “SGI Field Engineering Compliance Statements,” describes the
regulatory and compliance information for the system.