Silicon Graphics Total Performance 9300, User Manual

Page: 116 / 120

98 007-4644-001
B: SGI Field Engineering Compliance Statements
are designed to provide reasonable protection against such interference in an industrial
or office installation. However, there is no guarantee that the interference will not occur
in a particular installation. This system is not certified for home use.
You can determine whether your system is causing interference by turning it off. If the
interference stops, it was probably caused by the system.
If your system does cause interference to radio or television reception, try to correct the
interference by using one or more of the following suggestions:
• Turn the television or radio antenna until the interference stops.
• Move the system to one side or the other of the radio or television.
• Move the system farther away from the radio or television.
• Plug the system into an outlet that is on a different circuit from the radio or
television. (Make certain the system and the radio or television are on circuits
controlled by different circuit breakers or fuses.)
Product Safety
This product has been tested and is listed, certified, or approved to the following product
safety standards:
• UL 1950
• CAN/CSA C22.2, No. 950-M89
• IEC 950
• EN 60 950
• Standard for Safety of Information Technology Equipment, including Electrical
Business Equipment, Class 1, SELV
Electrostatic Discharge
SGI designs and tests its products to be immune to effects of electrostatic discharge
(ESD). ESD is a source of electromagnetic interference and can cause problems ranging
from data errors and lockups to permanent component damage.