Silicon Graphics Total Performance 9300, User Manual

Page: 117 / 120

Shielded Cables
007-4644-001 99
It is important that while you are operating this equipment you keep all the covers and
doors, including the plastics, in place. The shielded cables that came with the system and
its peripherals should be installed correctly, with all thumbscrews fastened securely.
An ESD wrist strap is included with some products, such as memory and graphics
upgrades. The wrist strap is used when installing these upgrades to prevent the flow of
static electricity, and it should protect your system from ESD damage.
Shielded Cables
The equipment described in this guide is FCC-compliant under test conditions that
include the use of shielded cables between it and its peripherals. This equipment and any
peripherals you purchase from SGI have shielded cables. Shielded cables reduce the
possibility of interference with radio, television, and other devices. If you use any cables
that are not from SGI, make sure they are shielded. Telephone cables do not need to be
shielded.
FCC Warning
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may
cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause
harmful interference, in which case the users will be required to correct the interference
at their own expense.