Silicon Graphics Origin 300, User Manual

Page: 251 / 264

Electrostatic Discharge
007-4498-002 225
Electrostatic Discharge
SGI designs and tests its products to be immune to the effects of electrostatic discharge
(ESD). ESD is a source of electromagnetic interference and can cause problems that range
from data errors and lockups to permanent component damage.
While you are operating the system, it is important that you keep all the covers and
doors, including the plastics, in place. The shielded cables that came with the system and
its peripherals should be installed correctly, with all thumbscrews fastened securely.
An ESD wrist strap may be included with some products, such as memory or PCI
upgrades. Use the wrist strap when you install these upgrades to prevent the flow of
static electricity; it is designed to protect your system from ESD damage.
Laser Compliance Statements
The CD-ROM drive in this system is a Class 1 laser product. The CD-ROM drive’s
classification label is located on the drive.
Warning:
Invisible laser radiation when open. Avoid exposure to beam.
Warning:
Attention: Radiation du faisceau laser invisible en cas d’ouverture. Evitter
toute exposition aux rayons.
Warning:
Vorsicht: Unsichtbare Laserstrahlung, Wenn Abdeckung geöffnet, nicht
dem Strahl aussetzen.
Warning:
Advertencia: Radiación láser invisible al ser abierto. Evite exponerse a los
rayos.