PCI Expansion Module
007-4498-002
145
PCI Expansion Module
The PCI expansion module is an optional device that provides an additional twelve PCI
slots for the Origin 300 system. As many as four PCI expansion modules can reside in this
system; the number of PCI expansion modules depends on the number of base modules
in the system (refer to Table A-11).
The PCI expansion module contains 6 buses; each bus can seat one or two 3.3-V or
universal PCI cards that mount on PCI carriers. Each bus supports either two 33-MHz
PCI cards or two 66-MHz PCI cards.
The PCI expansion module communicates with the Origin 300 base modules and the L2
controller via the NUMAlink module. The PCI expansion modules connect to the
NUMAlink module via ports 2, 3, 4, and 5.
Note:
For more information about the PCI expansion module, refer to the
PCI Expansion
Module User’s Guide
(007-4499-00x).
Table A-11
Number of Supported PCI Expansion Modules
Number of Base Modules
Supported PCI Expansion Modules
Two
Two
Three
Three
Four
Four
Five
Three
Six
Two
Seven
One
Eight
Zero
Summary of Contents for Origin 300
