Silicon Graphics Origin 300, User Manual

Page: 223 / 264

L1 Controller Command Set
007-4498-002 197
Use the other
pbay
commands as follows:
• Use the
pbay dps
command to view the status of all distributed power supplies or
an individual supply. The distributed power supplies are identified by a number
ranging from 1 to 6.
• Use the
pbay dcport
command to view the status of all DC output ports or an
individual DC port. The ports are identified by a number ranging from 1 to 8.
• Use the
pbay fru
command to view information about the power bay and DPS
FRUs. To view information about the power bay FRUs, use the number 0. To view
information about a distributed power supply FRU, use the numbers 1 through 6.
• Use the
pbay reset
command to reset the power bay and the power supplies.
• Use the
pbay env
command to view the status of the environmental monitoring
and to enable or disable environmental monitoring.
• Use the
pbay init
command to initialize communication with the power bay.
pci
The
pci
set of commands displays the status of the PCI cards in an Origin 300 base
module or a PCI expansion module. For the PCI expansion module, this command set
also powers up, powers down, or resets a PCI card:
•
pci
•
pci
<u|d>
•
pci reset
•
pci
<bus> <u|d>
•
pci
<bus>
reset
•
pci
<bus> <slot> <u|d>
•
pci
<bus> <slot>
reset
In the
pci
command set, the mnemonic
rst
may replace the word
reset
.