manualshive.com logo in svg

Silicon Graphics IRIS Indigo, Owner'S Manual, Page: 194 / 228

Share
Download
Silicon Graphics IRIS Indigo Owner'S Manual Download Page 194

178

Chapter 7: Safety, Maintenance, and Regulatory Information

Product Safety

This product has been tested and is listed, certified, or approved to the following product
safety standards:

•

UL 1950

•

CAN/CSA C22.2, No. 950-M89

•

IEC 950

•

EN 60 950

•

Standard for Safety of Information Technology Equipment, including Electrical
Business Equipment, Class1, SELV

Ergonomics

This product meets the applicable requirements of ISO 9241, and the European
Community Directive 90/270/EEC (Workstation Safety Law) specifications. This
product also meets Germany’s ZH1/618 requirements for deskside and bookshelf
products.

Electrostatic Discharge

Silicon Graphics designs and tests its products to be immune to effects of electrostatic
discharge (ESD). ESD is a source of electromagnetic interference and can cause problems
ranging from data errors and lockups to permanent component damage.

It is important that while you are operating your IRIS Indigo workstation you keep all
the covers and doors, including the plastics, in place. The shielded cables that came with
the system and its peripherals should be installed correctly, with all thumbscrews
fastened securely.

An ESD wrist strap is included with some products, such as memory and graphics
upgrades. The wrist strap is used when installing these upgrades to prevent the flow of
static electricity, and it should protect your system from ESD damage.

Summary of Contents for IRIS Indigo





































































































































































































































Reviews:

No comments