manualshive.com logo in svg

Silicon Graphics IRIS Indigo, Owner'S Manual, Page: 192 / 228

Share
Download
Silicon Graphics IRIS Indigo Owner'S Manual Download Page 192

176

Chapter 7: Safety, Maintenance, and Regulatory Information

Electromagnetic Emissions for IRIS Indigo R3000 Elan and IRIS
Indigo R4000

The Indigo R3000 Elan and Indigo R4000 comply with the Class A limits of Part 15 of the
FCC Rules. Operation is subject to the following two conditions:

•

This device may not cause harmful interference.

•

This device must accept any interference received, including interference that may
cause undesired operation.

This equipment does not exceed the Class A limits of Canada’s Department of
Communications Radio Interference Regulations for radio noise emissions.

This device complies with Class A electromagnetic emissions limits of C.I.S.P.R.
Publication 22, Limits and Methods of Measurement of Radio Interference
Characteristics of Information Technology Equipment, Germany’s BZT Class A limits for
Information Technology Equipment, and with Japan’s VCCI Class 1 limits.

Figure 7-3

VCCI Class 1 Statement for Japan

Caution:

Do not modify this product in any way that is not expressly approved by

Silicon Graphics. If you do, you may lose your FCC or other government agency
authority to operate this device.

Radio and Television Interference

The equipment described in this guide generates and uses radio frequency energy. If it is
not installed and used in accordance with the instructions in this guide, it can cause radio
and television interference.

Summary of Contents for IRIS Indigo





































































































































































































































Reviews:

No comments