manualshive.com logo in svg

Silicon Graphics IRIS Indigo, Owner'S Manual

The Silicon Graphics IRIS Indigo, a revolutionary workstation, offers an array of powerful features for unparalleled computing performance. Enhance your user experience by easily accessing the Owner's Manual, available for free download at manualshive.com. Discover step-by-step instructions and valuable insights to optimize your utilization of this remarkable product.

Share
Download
background image

Removing Optional Software

107

•

During optional product installation, the version of the operating system cannot
support the product. In this case, you need to install a new version of the operating
system, then install the optional product. See “Installing a New Version of the
Operating System Software” on page 93.

System Reports Errors After an Installation

If the system reports errors after an installation is complete, read the error message
carefully, and follow its instructions. The message suggests that you type

help

<topic>

for online instructions.

Warning:

If the errors occur after you install new system software, do not turn off

the system or press the Reset button. This could result in a system that cannot restart.

If you cannot solve the problem using the online help, contact your local support
organization.

Removing Optional Software

When your system starts getting low on disk space, you may want to review the software
products and the subsystems of these products. You may no longer need certain products,
or you may discover that some products include large, optional subsystems that you can
remove without removing the core product.

The administrator can remove software by following these steps:

1.

Start the software installation tool by choosing “Software Manager” from the
System toolchest.

2. A text window with a menu appears. At the

Inst>

 prompt at the bottom of the

window, type:

versions

You see a list of all software products that are installed.

Summary of Contents for IRIS Indigo





































































































































































































































Reviews:

No comments

Related manuals for IRIS Indigo

IBM 5110 Basic Introduction preview
5110
Brand: IBM Pages: 170
IBM 5110 Maintenance Analysis Procedures preview
5110
Brand: IBM Pages: 257
IBM 5110 General Information And Physical Planning Manual preview
5110
Brand: IBM Pages: 63
Everex Impact GD3300 User Manual preview
Impact GD3300
Brand: Everex Pages: 47
DFI DT122-SB Installation Manual preview
DT122-SB
Brand: DFI Pages: 15
Compaq CQ2000 - Desktop PC Manual preview
CQ2000 - Desktop PC
Brand: Compaq Pages: 12
GARANT eLevel User Manual preview
eLevel
Brand: GARANT Pages: 60
AWOW AK34 Quick Manual preview
AK34
Brand: AWOW Pages: 4
iameco ecoXPc Quick Start Manual preview
ecoXPc
Brand: iameco Pages: 3
Sony VAIO Digital Studio computer Service Manual preview
VAIO Digital Studio computer
Brand: Sony Pages: 23
Sony Vaio VGN-S63PZ Service Manual preview
Vaio VGN-S63PZ
Brand: Sony Pages: 25
Cavalry CAU3I Firmware Instructions preview
CAU3I
Brand: Cavalry Pages: 3
BPC 8590 User Manual preview
8590
Brand: BPC Pages: 81
Motion Computing 002-15-0010 Installation And Assembly Manual preview
002-15-0010
Brand: Motion Computing Pages: 26
Rikomagic MK808 B User Manual preview
MK808 B
Brand: Rikomagic Pages: 14
Elite Progres Plus Series Assembly Instructions preview
Progres Plus Series
Brand: Elite Pages: 2
Elite RC-1 Manual preview
RC-1
Brand: Elite Pages: 3
TYAN GA80-B7061 Service Engineer'S Manual preview
GA80-B7061
Brand: TYAN Pages: 167

Brands by name

Popular brands

Load more brands