136
Chapter 6: Troubleshooting
Replacing the Keyboard
Follow these steps to replace the keyboard:
1.
Shut down and turn off the system.
■
From the System toolchest, choose “System Shutdown.” The toolchests are
shown in Figure 6-12.
■
Turn off the power switch on the back of the Indigo chassis.
2. Disconnect the mouse from the keyboard and then disconnect the cable from the
keyboard and from the main unit.
3. Connect one end of the new keyboard cable to the port labelled with the keyboard
icon on the back of the main unit.
4. Plug the other end of the cable into one side of the keyboard.
5. Plug the mouse into the other side of the keyboard.
6. Turn on the system.
Replacing the Graphics Board
To replace the graphics board, you’ll shut down the system, remove the covers and
graphics board, install the new board, and replace the covers.
Shutting Down the System
To shut down the system, follow these steps:
1.
Shut down and turn off the system.
■
From the System toolchest, choose “System Shutdown.” The toolchests are
shown in Figure 6-13.
■
Turn off the power switch on the back of the Indigo chassis.
2. Disconnect all the cables from the back of the IRIS Indigo workstation.
Make sure to disconnect the black power cable.
Figure 6-12
The Toolchests
Figure 6-13
The Toolchests
