19
Silhouette Cameo® 4 User Manual
Prepare the Cameo 4
Place Material on the Cutting Mat
Remove the nonstick liner from the cutting mat. A new mat will be very sticky at first. To avoid damaging any materials
you place on your cutting mat, place the mat, sticky side down on a surface that doesn’t release too much lint, such as
denim or microfiber. This will make the mat less sticky but still allow it to grab on to materials without damaging them.
Position your paper or other media on the cutting mat according to the illustration in Silhouette Studio®.
Turn On the Cameo
Turn the Silhouette Cameo® on by pressing the power button and waiting for the machine to start up. To feed the
cutting mat into the machine
f
Lift the lid and slide it back.
f
Align the left edge of the mat with the blue alignment mark on the left side of the machine.
f
Press the mat against the white rollers.
f
Press the arrow pointing up on the touch panel to load your mat into cutting position.
If you don’t see an image of the cutting mat under your document on the screen, click the Page Setup icon at the top of
the Silhouette toolbar on the right-hand side of the window. Under the Cutting Mat section, select the Cameo mat.
Position your image on the screen where you want it to cut on the mat. Be sure to keep your design within the red
margins on your page.
Summary of Contents for CAMEO 4
Page 1: ...User Manual ...
