Silex technology ST-700 User Manual Download Page 90

Page: 90 / 126

ST-700 User's Manual

The new settings will take effect after ST-700
restarts. Click

Restart

When the login page appears. The log export setting has been completed.
A log message will be sent to Syslog server

- To continue updating settings in other pages, wait restarting ST-700 until all updates are done.

Note

The log message is in the following format.
<Pri><Process>:< Message >

Output Example (1)

<6>kernel: [1173.959511] wlan: [3438:E :HDD] received scan request

Output Example (2)

<78>CROND[4347]: (root) CMD (/usr/sbin/logrotate /etc/logrotate.conf)

- When ST-700 is not communicating with Syslog server, log messages cannot be sent to the Syslog server.

Note

Detail

Pri

: Log type (facility) and the severity (Refer to RFC 3164)

Process

: kernel or a process name (source). When it is a process name, [ID] will be displayed.

Message

: Log message

Summary of Contents for ST-700






























































































































Search results

Summary of Contents for ST-700

Reviews:

Brands by name

Popular brands

Silex technology ST-700, User Manual

Search results

Summary of Contents for ST-700

Reviews:

Brands by name

Popular brands