Silex technology ST-700, User Manual

Page: 16 / 126

10
ST-700 User's Manual
2-1. Features
Connect ST-700 to an Ethernet HUB in your network using a LAN cable. By doing so, ST-700 can be
confi gured via a network and its system will be set up to transmit programs.
The following diagram shows an example of system structure using ST-700.
2-1-1. System Structure
- This is just an example. You can confi gure a system to broadcast programs without connecting ST-700 to your
network environment. For more details, see
4-3. Installing ST-700 without NTP Server
.
Note
ST-700 has the following features.
- Plays programs created with Silex's original software SX Sign Control Software.
- Divides the monitor screen up to 8 layers, and shows videos or still images on each layer.
Note: Videos can be played on one layer only. Web pages can be shown on up to two layers.
- Output resolutions: 3840 x 2160 pixels (4K)
- Equipped with a web browser to show web content conforming to HTML 5.
- Decoder of H.264 and H.265/HEVC codec
- Supports power supply of IEEE802.3at PoE+.
Note: If you are using ST-700 (EU), only the AC adapter can be used.
- Plays videos in sync with other ST-700 units operating in the same network. Up to 9 units can play
video content in sync.
- Equipped with a DHCP server.
- A periodic restart function that automatically restarts ST-700 at the specifi ed time.
- Supports the wireless LAN standards IEEE 802.11a/b/g/n/ac, and connects to 2.4 GHz or 5 GHz.
- Access Point mode and Station mode as the wireless LAN operation modes, which can be switched
by changing the setting.
- Supports IEEE 802.1X as the authentication method for Station mode, which provides robust
security.
- Works with Silex's comprehensive device management software AMC Manager® (sold separately).
2-1-2. Features
Display
ST-700
PC
Ethernet HUB
Your Network
NTP Server
LAN Cable
HDMI Cable
Display
ST-700
Display
ST-700
Ethernet HUB
PC
（ SX Sign Control Software ）
HDMI Cable
LAN Cable
LAN Cable
HDMI Cable