Silex technology ST-700 User Manual Download Page 23

Page: 23 / 126

2. Product Specifications

(15) RESET switch (RESET)

Push to reset ST-700 to the factory default settings.

(16) USB 2.0 Port (USB 1)

Connect to an HID device or a small storage to change programs.

(17) LAN Port 1 (LAN)

Connect a LAN cable.

(18) LAN Port 2 (LAN/PoE)

Connect a LAN cable. This can be connected to a hub supporting PoE+ power feeding.

(19) LINK LED

1000BASE Link Status:

Color

Light

Description

Green

ST-700 is linking up in 1000BASE.

Blink

ST-700 is sending/receiving data in the middle of 1000BASE link-up status.

OFF

The wired LAN is disconnected.

(20) LINK LED

100BASE Link Status:

Color

Light

Description

Orange

ST-700 is linking up in 100BASE.

Blink

ST-700 is sending/receiving data in the middle of 100BASE link-up status.

OFF

The wired LAN is disconnected.

RESET

USB

LAN

LAN/PoE

(15)

(16)

(17)

(18)

(19)
(20)

- If you are using ST-700 (EU), only the AC adapter can be used.

TIP

Summary of Contents for ST-700






























































































































Search results

Summary of Contents for ST-700

Reviews:

Brands by name

Popular brands

Silex technology ST-700, User Manual

Search results

Summary of Contents for ST-700

Reviews:

Brands by name

Popular brands