manualshive.com logo in svg

Silex technology ST-700, User Manual

Share
Download
Silex technology ST-700 User Manual Download Page 102

96

ST-700 User's Manual

Name

DHCP Server Function

Description

It enables/disables DHCP server. 
Enable this setting to run ST-700 as DHCP server to automatically assign 
an IP address to PC.
Disable this when DHCP server already exists in the same network.  

Value/Range

ENABLE/DISABLE

Default value DISABLE

DHCP Server Configuration

Name

DNS Server (Primary)

Description

It specifies the address of DNS primary server. 
When DHCP client is enabled, DNS server obtained with DHCP will be 
preferentially assigned.

Value/Range

0.0.0.0 to 255.255.255.255

Default value 0.0.0.0

DNS Configuration

Name

Default Gateway

Description

It specifies a gateway address. 
"0.0.0.0" (default value) disables the setting. 
Use this setting when DHCP client is disabled. 

Value/Range

0.0.0.0 to 255.255.255.255

Default value 0.0.0.0

Name

DNS Server (Secondary)

Description

It specifies the address of DNS secondary server. 
When DHCP client is enabled, DNS server obtained with DHCP will be 
preferentially assigned.

Value/Range

0.0.0.0 to 255.255.255.255

Default value 0.0.0.0

TIP

 - When the local domain name of the DNS server ends with ".local", name resolution cannot be used because it 

conflicts with the mDNS service.

Summary of Contents for ST-700































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands