manualshive.com logo in svg

Silex technology ST-700, User Manual

Share
Download
Silex technology ST-700 User Manual Download Page 19

2. Product Specifications

13

2-2. Parts and Functions

This chapter describes names and functions of ST-700 parts. 

(1) POWER LED

Color

Light

Description 

Green

ON

ST-700 is powered on.

Blink

-

Orange

ON

The USB file link function is operating.

Blink

The USB file link function has been completed. (1,000-millisecond cycle)

Red

ON

Factory reset (When the RESET switch is pushed for a long time while 

ST-700 is booting.)

Blink

The wired LAN port is working under 10BASE connection. 

(2,000-millisecond cycle)

A USB storage disconnection error occurs. (500-millisecond cycle)

The USB over current status is detected. (200-millisecond cycle)

(2) STAT LED

Color

Light

Description 

Green

ON

-

Blink

-

Orange

ON

-

Blink

The internal storage has been accessed.

Red

ON

-

Blink

The firmware is being updated. (2,000-millisecond cycle)

(1) (2)

(3)

(4)

(5)

[      ]

[      ]
[      ]
[      ]
[      ]

[      ]

[      ]
[      ]
[      ]
[      ]

Summary of Contents for ST-700































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands