manualshive.com logo in svg

Silex technology ST-700, User Manual

Share
Download
Silex technology ST-700 User Manual Download Page 17

2. Product Specifications

11

ST-700 uses the following tools: 

 - AMC Manager®
 - SX Sign Control Software

The following sections show outline of the tools. 

2-1-3. Used Tools

AMC Manager®

AMC Manager® is total management software of Silex devices that allows remote monitoring of Silex 
products and enables users to configure settings in bulk or individually using an IP network. 

AMC Manager® shows ST-700's operation status in a list. Silex provides AMC Manager® Free (free 
license) and AMC Manager® (non-free license). AMC Manager® Free is used in this document.

 - AMC Manager® Free allows up to 10 devices to be configured at once.
 - To use AMC Manager® (non-free license), you need to purchase a license key.
 - Please contact Silex Technology, Inc. to purchase the license key. For the contact information, see 

1-3. Product 

Information and Customer Services

.

TIP

Summary of Contents for ST-700































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands