Silex technology ST-700, User Manual

Page: 40 / 126

34
ST-700 User's Manual
3-3. Individual Setup
This section describes how to set up a single device.
Connect ST-700 to Ethernet hub (1), and power on ST-700 (2, 3)
1.
- Assign IP address that can communicate with ST-700 to the PC (to use for the setup). To make the initial
settings, choose Obtain an IP address automatically for the IP address of the PC.
- When you set up ST-700 in a network without DHCP server, specify a link-local address (169.254.xxx.xxx)
for the IP address of the PC.
- In the network settings of the PC, disable network adapters other than the LAN port used for the setup.
TIP
- You can directly connect ST-700 and the PC with a LAN cable for the settings.
Note
Run AMC Manager® on the PC.
When ST-700 is shown in the device list of AMC Manager®, select it (1) and click the
Confi gure the
device icon ( ) from the tool bar (2).
2.
PC
ST-700
LAN Cable
Ethernet HUB
AC Adapter
Electrical Outlet
(2)
(3)
(1)
(1)
(1)
(2)