background image

 11

Note

If the hand-held transmitter is in the menu mode and the 

buttons are not pressed for longer than  30 seconds, the menu 

is automatically changed back to operating mode without 

saving the changes.

DATE/TIME menu

Setting the date and time. Using the automatic switching commands 

requires a current setting.

PROGRAM menu

Once you have selected the channel, you 

can set different switching times:

•  Individual (each day can be selected)

•  Astro (each day can be selected), set 

ON at the factory

•  Astro evening (each day can be 

selected)

The selection of the switching or lock times 

assigned to days is performed using the 

activation of the days of the week using the 

joystick ( open/close).

Switching time 

example:

  

All switching times can also be deactivated per channel for all 

days, display "–:–" for deactivated switching times.

Note

It is not possible to select different switching times for speci

fi

 c 

channels for several unidirectional function channels (switching 

time applies to all unidirectional channels).

Individual

Automatic  open and  close movements at the set times and days.

Change

Back

Switching times channel 4

07:25 

Mo   Tu   We   Th   Fr   Sa   Su

20:15 

 

 

Explanation of functions

Summary of Contents for SG 10303






























Reviews: