18
The transmitter can now be assigned without having to
disconnect individual receivers. If the blind moves in the wrong
direction, delete the transmitter and program it again.
(
→
see Deletion of transmitter)
For programming additional transmitters to one receiver:
1. Press the
OPEN
,
CLOSE
buttons and the programming button
P
(back of device) simultaneously (for 3 seconds) on a transmitter
which has already been programmed to the receiver. The status
display lights brie
fl
y. The receiver is now in programming mode.
2. Press the programming button
P
on the transmitter to be
programmed until the status display lights brie
fl
y. The receiver is
now in programming mode (up/ close movements).
3. Press the
OPEN
button as soon as the blind starts moving in
Open direction (within 1 second at the most). The status display
lights brie
fl
y. The blind stops brie
fl
y, starts moving again and
then moves downwards.
4. Immediately (within maximum 1 second) after starting close
travel, press the
CLOSE
button. The status display lights brie
fl
y.
The blind stops. The transmitter channel is programmed.
If more than 10 bidirectional receivers are being programmed at the
same time, the transmitter channel in programming mode switches
to group mode. The group mode is indicated by fast
fl
ashing with
pauses.
Programming in group mode is completed after a 2-minute pause or
pressing the
STOP
button for 6 seconds.
5. Press the
CLOSE
button and the programming button
P
(back of
device) simultaneously . The status display
fl
ashes. The receivers
are now in programming mode.
6. For bidirectional operation only: press the programming button
P
on the transmitter to be programmed until the status display
lights brie
fl
y. The receivers are now in programming mode
( open/ close movements).
7. Press the
OPEN
button as soon as the blind starts moving in
open direction (within 1 second at the most). The status display
Explanation of functions
