26
Fault
Cause
Remedy
End positions are ap-
proached inaccurately
End positions not
yet set
Have the end
positions set by a
specialist in accord-
ance with the product
instructions
The hand-held trans-
mitter does not carry
out the set switching
commands
1. The date and time
are not set
2. "MANUAL" operat-
ing mode is set
3. The timed switch-
ing functions for
speci
fi
c channels are
not activated
1. Setting the date
and time
2. Set “AUTO” operat-
ing mode
3. Activate the timed
switching function for
the channel
The hand-held trans-
mitter does not carry
out the set switching
commands accurately
Holiday function is
switched on
Switch holiday func-
tion off
The Astro program
switches inaccurately
1. Date set incorrectly
2. Holiday function is
switched on
3. Astro offset is set
1. Set correct date
2. Switch holiday
function off
3. Adjust Astro offset
There is no timed
switching function for
automatic switching
commands after the
batteries have been
replaced
Power supply inter-
rupted for too long
Setting the date and
time
Repair
Please contact your dealer if you have any questions.
Please always provide the following information:
• Item number and name on the type plate
Repair
