SII LP-1010 User Manual Download Page 94

Page: 94 / 290

3-4

Job N

Job N-1

Job N-n

Job M

Job M-1

Job M-n

Job L

Job L-1

Job L-n

Job (data) receive

Deletion is possible

Move to the head of
print standby

Job standing by for
processing

Job being processed

Processed jobs

Only reference
is possible

Deleting is
possible

Reprinting (moving to the head
of print standby) is possible

Delete in succession

Printing

Jobs

The device manages the received data in units of “jobs.” Data transferred

in units of “FILES” and data managed by the device in units of “JOBS”

refer to the same thing.

However, as data comprised of multiple drawings can also managed as a

single job. So one print job isn’t mecessarily composed of one drawing.

For all print fobs, the print status of the job can be checked from the

remote control, the print order can be changed, and reprinting etc. is

available.

Reprinting

By using the “REPRINT” function in the Job menu, pre-processed jobs

can be moved to the top of the list of jobs standing by to be processed.

This function allows you to reprint jobs which have already been printed.

Also, at the time of printing you can specify the number of copies and

change printing parameters.

Summary of Contents for LP-1010



































































































































































































































































































Search results

Summary of Contents for LP-1010

Reviews:

Related manuals for LP-1010

Brands by name

Popular brands

SII LP-1010, User Manual

Search results

Summary of Contents for LP-1010

Reviews:

Related manuals for LP-1010

Brands by name

Popular brands