manualshive.com logo in svg

SII LP-1010, User Manual

The SII LP-1010 User Manual is a comprehensive guide designed to assist users in operating their LP-1010 device effortlessly. This detailed manual can be easily downloaded for free from our website, ensuring users have all the necessary instructions and information at their fingertips.

Share
Download
background image

1-14

Control panel

The keys, LEDs and LCD are laid out on the control panel as illustrated in

the following diagram.

2

LCD

The status of this device, as well as a
menu to set the device functions appears
on a 20-digit, 2-line display.

1

LEDs

The device status is
indicated by LED’s on,
flashing, and off.

3

Keys

Use these keys to set device functions.

4

Power key

Use this key to turn
ON/OFF this device.

Summary of Contents for LP-1010



































































































































































































































































































Reviews:

No comments

Related manuals for LP-1010

Gerber Technology AccuPlot AP-100 User Manual preview
AccuPlot AP-100
Brand: Gerber Technology Pages: 87
Gerber Technology GERBERplotter MP Series User Manual preview
GERBERplotter MP Series
Brand: Gerber Technology Pages: 184

Brands by name

Popular brands

Load more brands