manualshive.com logo in svg

SII LP-1010, User Manual

The SII LP-1010 User Manual is a comprehensive guide designed to assist users in operating their LP-1010 device effortlessly. This detailed manual can be easily downloaded for free from our website, ensuring users have all the necessary instructions and information at their fingertips.

Share
Download
background image

5-27

▼

Setting parameter items

Chapter 5  "SETUP" Menu

■

DRAWING (DSCAN only)

Sets whether or not to plot DRAWING. This setting is performed on the

third hierarchy.

<Parameter (choice input method)>

     : Default value

NOP

DRAWING Plot is not performed.

EOF

DRAWING Plot is performed.

■

PAPER NO.(DSCAN only)

Allows for setting how to handle the paper type No.  When handling the

paper type No. as the paper source, paper supply is controlled as listed

below.

This setting is performed on the third hierarchy.

<Parameter (choice input method)>

     : Default value

PAPER SOURCE/

Handles paper type No. as the paper source.

PAPER TYPE/

Handles paper type No. as the paper type.

OFF/

Disables paper type No. of information block.

Summary of Contents for LP-1010



































































































































































































































































































Reviews:

No comments

Related manuals for LP-1010

Brands by name

Popular brands

Load more brands