manualshive.com logo in svg

SII LP-1010, User Manual

The SII LP-1010 User Manual is a comprehensive guide designed to assist users in operating their LP-1010 device effortlessly. This detailed manual can be easily downloaded for free from our website, ensuring users have all the necessary instructions and information at their fingertips.

Share
Download
background image

14-38

When there is an abnormal sound

If you hear an abnormal sound, contact your dealer or our service center.

Note

◆

In order to prevent the waste toner from accumulating

unevenly in the waste toner bottle, this device provides

the maintenance function that taps the waste toner bottle

at the definite interval to level the waste toner. (

⇒

 page

14-36)

Taps will be heard during the maintenance of waste

toner, but this is not a problem.

Summary of Contents for LP-1010



































































































































































































































































































Reviews:

No comments

Related manuals for LP-1010

CalComp 1040 Series Getting Started preview
1040 Series
Brand: CalComp Pages: 4

Brands by name

Popular brands

Load more brands