manualshive.com logo in svg

SII LP-1010, User Manual

The SII LP-1010 User Manual is a comprehensive guide designed to assist users in operating their LP-1010 device effortlessly. This detailed manual can be easily downloaded for free from our website, ensuring users have all the necessary instructions and information at their fingertips.

Share
Download
background image

5-22

■

SCALE X (%)

SCALE Y (%)

When setting "SCALE MODE = MANUAL SCALE," values of the scale

applied to X and Y directions of the drawing are set up.

This setting is performed on the third hierarchy.

<Parameter (numerical value input method)>

 0.01 to 1000.00

Default value = 100

This setting is enabled when setting "SCALE MODE = MANUAL

SCALE."  When it is set to 100%, the plot is produced in 1-to-1

magnification.

■

PEN WIDTH SCALE (HP-GL, DSCAN only)

Sets the scaling down method, when the drawing is scaled down (in the

same X and Y proportion). This setting is performed on the third

hierarchy.

<Parameter (choice input method)>

     : Default value

ON

Line width or interval between points are also scaled down.

Maximum line width is 16 mm (0.63 inches).

OFF

Line width or interval between points are not scaled down.

■

FIX SCALE A

FIX SCALE 9"

FIX SCALE 8.5"

Allows for setting the method of automatic scale from one fixed form to

another when setting "SCALE MODE = MANUAL SCALE."  This

setting is disabled when plotting in the actual length or expanded fixed

form.  This setting is performed on the third hierarchy.

Summary of Contents for LP-1010



































































































































































































































































































Reviews:

No comments

Related manuals for LP-1010

MIMAKI TPC-1000 Safety Precautions preview
TPC-1000
Brand: MIMAKI Pages: 20

Brands by name

Popular brands

Load more brands