SII LP-1010 User Manual Download Page 132

Page: 132 / 290

5-14

: Default value*

FIX SIZE

Produces fixed form of plots.

EXTENSION A

In addition to the fixed size of A1 to A4, sizes extended from

the fixed size by 0.5 in vertical direction (1.5A3, 2A2, etc.) are

also handled as the fixed form. When plotting on paper other

than the A series, use the fixed form plotting procedure.

REAL SCALE

Prints at actual length.

◆

The default value varies depending on the setting in the

INITIAL SETTING.

◆

When producing plots on paper of China series, printing is

always made at actual length.

◆

DSCAN displays FIX as A SERIES.

COPY COUNT

Allows for choosing of the number of copies.

When the number of copies is set with the HP-GL data, setting of the data

is used.

This setting is performed on the second hierarchy.

1 to 99 (No. of sheets)

Default value=1

Notes

Summary of Contents for LP-1010



































































































































































































































































































Search results

Summary of Contents for LP-1010

Reviews:

Related manuals for LP-1010

Brands by name

Popular brands

SII LP-1010, User Manual

Search results

Summary of Contents for LP-1010

Reviews:

Related manuals for LP-1010

Brands by name

Popular brands