![background image](http://html1.mh-extra.com/html/sigma/1-7/1-7_operating-manual_1267877036.webp)
Laboratory centrifuge Sigma 1-7
6 Using the centrifuge
36 / 68
Version 08/2018, Rev. 1.7 of 28/04/2022
• sb
Translation of the original operating manual, part no. 0703402
Pos : 137 /100 Sigma/110 BA Z entrif ugen Sigma (Proj ekt e)/ 1-16_1- 16K_1-7/061 Betri eb/Spincontr ol Basic/ 061- 0030-0090 R ot orausw ahl 1- 7 @ 53\m od_1509963968778_68.docx @ 532009 @ 3 @ 1
6.3.9
Rotor selection
In the delivery status of the centrifuge, the rotor 91429 is preselected. If
another rotor is installed the configuration must be changed, so that the
allowed maximum speed of the rotor can be reached.
• To select another rotor, press the set key and hold it for approx.
2 seconds.
• Choose the number of the installed rotor out of the following list, by
pressing the arrow keys:
Code
1
2
3
4
5
Rotor
91429
--
--
--
--
Code
6
7
8
9
10
Rotor
--
--
--
--
--
• Press the set key to confirm the input.
The RCF value will be adjusted automatically to the selected rotor.
NOTE
The rotor selection will be saved under the corresponding program
number.
Pos : 138 /010 Univ ers almodul e/ Seit enwechs el @ 0\mod_1202116244312_0.docx @ 105 @ @ 1