Laboratory centrifuge Sigma 1-7
3 Safety
Version 08/2018, Rev. 1.7 of 28/04/2022
• sb
15 / 68
Translation of the original operating manual, part no. 0703402
Pos : 31 / 100 Sigma/ 100 BA Zentrif ugen Sigma (Standar dmodule)/ 030 Sic her heit /030 Sic her hei t=============== ======================== @ 26\m od_1405319007254_68. docx @ 191877 @ 1 @ 1
→
3
Safety
Pos : 32 / 100 Sigma/ 110 BA Zentrif ugen Sigma (Pr ojekte) /1- 16_1-16K_1- 7/ 030 Sic her heit /030-0010 Besc hilderung des G eräts 1-7 @ 82\mod_1621236511576_68. docx @ 870938 @ 2 @ 1
→
3.1
Marking of the unit
The following symbols are used on this centrifuge:
I
On (Power)
Arrow indicating the direction
of rotation
0
Off (Power)
Name plate (see chapter 2.1.2
- "Name plate")
CE mark in compliance with the
directive 2006/42/EC
Do not dispose as part of
domestic waste
Consult operating manual
RCM mark
(only for Australia)
China RoHS 2 mark
(only for China)
NOTE
Safety indications on the centrifuge must be kept readable at all times. If
necessary, they must be replaced.
NOTE
The marking varies depending on the version and country of destination of
the centrifuge.
Pos : 33 / 010 U nivers almodule/ Seitenw ec hsel @ 0\m od_1202116244312_0. docx @ 105 @ @ 1