16
2.3 MIG Manual Display
PANEL FUNCTIONS & DESCRIPTIONS
19
§3.2.3 MIG Manual control panel
1. Welding mode button
: Press it to select MIG Manual welding mode.
2. L parameter knob
: Rotate it to adjust wire feeding speed. In functional parameter
interface, rotate it to select parameters.
3. R parameter knob
: Rotate it to adjust parameters.
4. Functional parameter button
.
5. Cooling mode button
: Press it to select water cooling mode.
6. Manual shield gas check button.
7. Manual wire feed button.
MIG Manual functional parameter interface:
1. Trigger mode
: 2T/ 4T/ Spot weld.
1. Welding mode button
Press it to select MIG Manual welding mode.
2. L parameter knob
Rotate it to adjust wire feeding speed. In functional parameter interface, rotate it to select parameters.
3. R parameter knob
Rotate it to adjust parameters.
4. Functional parameter button.
5. Cooling mode button
Press it to select water cooling mode.
6. Manual shield gas check button.
7. Manual wire feed button.
PANEL FUNCTIONS & DESCRIPTIONS
1
panel (0.0
～
10S);
(12) t7: Electromagnetic valve is closed and stop argon flowing. Welding is finished.
§3.2.4 MIG Manual display introduction
1. Welding mode button
: Press it to enter MIG Manual welding mode.
2. L parameter knob
: Rotate it to adjust wire feeding speed. In function interface,
rotate it to select parameters.
3. R parameter knob
: rotate it to adjust Inductance or other parameters.
4. Function button
: Press it to enter the function interface.
5. Air check button.
6. Manual wire button.
Function interface:
FUNCTION INTERFACE
1.Trigger mode:
2T/ 4T/ Spot weld.
2. Pre Flow:
0-10s.
3. Post Flow:
0-10s.
4. Burnback:
0-10.
5. Slow Feed:
0-10s.
Summary of Contents for Evolution MTS400 SYN
Page 39: ...39 Notes ...
