Sierra Wireless AirPrime WP75 Series, At Command Reference

Page: 37 / 300

Modem Status, Customization, and Reset Commands
Rev. 6 Oct.18 Proprietary and Confidential - Contents subject to change 37
!BAND
Note: The ‘Basic’
command and response
versions are used if you
haven’t entered the
required password. (See
Command access on
page 13.)
Select/return frequency band set
Configure the modem to operate on a set of frequency bands, look up available sets, create
new sets, or return the current selection.
Important:
To avoid issues with incompatible RAT/band combinations:
• If !BAND is used, +KSRAT must be set to ‘All RATS, automatic".
• If !BAND and !SELRAT are used, either !BAND must be set to ‘All Bands’ or !SELRAT
must be set to ‘Automatic’.
• If +KSRAT is used, !BAND must be set to ‘All Bands’ and !SELRAT must not be used.
Note: The "02 User bands" set can also be changed using AT *PSRDBS on page 98 by
selecting a set of bands that does not match any of the existing band sets.
Password required: Yes—Execution (Extended) format (see !ENTERCND for details)
Usage:
•
Execution (Basic):
AT!BAND=<Index>
Response: OK
Purpose: Select an existing set of bands.
•
Execution (Extended):
AT!BAND=<Index>,"<Name>",<GWmask>[,<Lmask>[,<Lmask2>[,<Tdsma
sk>]]]
Response: OK
Purpose: Create a new set of bands for the specified <index> position and assign a
descriptive <Name> to the set.
•
Query (Basic):
AT!BAND?
Response: Index, Name
<Index>, <Name>
OK
or (If the current band mask doesn’t match a band set)
Unknown band mask. Use AT!BAND to set band.
<bandmask>
OK
Purpose: Report the current band selection.
•
Query (Extended):
AT!BAND?
Response (WPx5xx):
Index, Name, GW Band Mask L Band Mask TDS Band Mask
<Index>, <Name>, <GWmask> <Lmask> <Tdsmask>
OK
or (If the current band mask doesn’t match a band set)
Unknown band mask. Use AT!BAND to set band.
<Index>
OK
(Continued on next page)
Table 3-2: Modem Status Command Details (Continued)
Command Description