AirPrime WP8548 / WP75xx / WP76xx / WP77xx AT Command Reference
26
Proprietary and Confidential - Contents subject to change
4118047
Command reference
Table 2-2: AT Password Command Details
Command
Description
!ENTERCND
Enable access to password-protected commands
Before any password-protected AT commands can be used, !ENTERCND must be used to
enter the password to gain access. The initial password is configured onto the modem during
manufacture. You can change the password using
. If you do not know the
password, contact your Sierra Wireless account manager.
Once the password has been entered correctly, the password-protected AT commands are
available until the modem is reset or powered off and on.
Password required:
Yes—Query format only.
Reset required to apply changes:
No
Persistent across power cycles:
No
Usage:
•
Execution:
AT!ENTERCND=<“key”>
Response:
OK
Purpose:
Unlock password-protected commands.
•
Query:
AT!ENTERCND?
Response:
<key>
(if unlocked)
Purpose:
This command is password-protected. After entering the password correctly
using the execution operation (“=”), you can use this command to display
the password as a reminder.
Parameters:
<“key”> (Password stored in NV memory)
•
Password must be entered with quotation marks. (For example,
AT!ENTERCND=”ExamplePW”.)
•
Length: (WP75xx/WP85xx) 4–10 characters; (WP76xx/WP77xx) 4–15 characters
•
Supported characters: ‘0’–’9’, ‘A’–’Z’, ‘a’–’z’, special characters (e.g. “!#$%&’()*+,-./
:<>=?@”
Note: Double quotes (“) are not allowed.
•
Characters may be entered in ASCII format, or in Hex format. (For example:
“myPass3” or “ABCDEF01234”.)
