AirPrime WP8548 / WP75xx / WP76xx / WP77xx AT Command Reference
14
Proprietary and Confidential - Contents subject to change
4118047
When building automated test scripts, ensure that sufficient delays are
embedded, where necessary, to avoid these errors.
Escape sequence guard time
The AT escape sequence “
+++
” requires a guard time of 1.0 seconds before and
after it is used.
Result codes
Result codes are not shown in the command tables unless special conditions
apply. Generally the result code
OK
is returned when the command has been
executed.
ERROR
may be returned if parameters are out of range, and is returned
if the command is not recognized or is not permitted in the current state or
condition of the modem.
Response formats
Response formats shown in this document are intended to accurately describe
the non-whitespace content of responses. For display purposes within this
document, extraneous whitespace content (blank lines between lines of text) may
not be displayed, and whitespace (blank spaces) between text segments within
lines may be shorter or longer than what is received in actual responses.
For example:
If automated scripts are used to parse command responses, make sure to parse
whitespace appropriately.
References
This guide covers the command sets used by OEMs, designers and testers of
Sierra Wireless AirPrime products, plus general operational use commands.
For additional product-specific documentation, refer to
Terminology and acronyms
This document makes wide use of acronyms that are in common use in data
communications and cellular technology.
AT!THISEXAMPLE?
THISEXAMPLE:
TestVal1=7 TestVal2=Hello
OK
could be shown in
this document
without extra blank
lines and with less
space between
TestVal1 and
TestVal2
AT!THISEXAMPLE?
THISEXAMPLE:
TestVal1=7 TestVa2=Hello
OK
