Sierra Wireless AirPrime WP75 Series, At Command Reference

Page: 54 / 300

AirPrime WP8548 / WP75xx / WP76xx / WP77xx AT Command Reference
54 Proprietary and Confidential - Contents subject to change 4118047
!CUSTOM
(continued)
Set/query customization settings (continued)
•
"STKUIEN"—(All WP) Enable/disable SIM toolkit UI.
<value>:
•
0—Enable for QMI interface
•
1—Reserved
•
2—Enable for AT interface
•
"UIMAUTOSWITCH"—(WP76xx/WP77xx) Enable/disable Automatic SIM switching.
<value>:
•
0—Disable automatic SIM switching
•
1—Enable, UIM Slot 1 preferred
•
2—Enable, UIM Slot 2 preferred
•
Note—If enabled (1 or 2), the !UIMS setting is updated to reflect the preferred
slot.
•
"UIMDETPULL"—(WP8548/WP75xx) Configure UIM detect lines pull settings. (Note:
Hotswap must be enabled for a UIM slot for the corresponding pull setting to take
effect.)
<value>:
•
0–15 (4 bits)
•
Bits 1/0: UIM1_DET pull setting
•
Bits 3/2: UIM2_DET pull setting
•
Example:
•
AT!CUSTOM="UIMDETPULL",9
(9= ‘1001’ = UIM2 Pull down (‘10’) and UIM1 No pull (‘01’)
•
"WAKEHOSTEN"—(All WP) Enable/disable host wake-up via SMS or incoming data
packet.
<value>:
•
0—Disable—Host will not wake when SMS or incoming data packet is
received. (Default)
•
1—Wake host when simple SMS is received.
•
2—Wake host when incoming data packet is received.
•
3—Wake host when simple SMS or incoming data packet is received.
Table 3-2: Modem Status Command Details (Continued)
Command Description
Bit 3 Bit 2 Bit 1 Bit 0 Description
1 1 X X UIM2 Pull Up
1 0 X X UIM2 Pull down
0 1 X X UIM2 No pull
0 0 X X UIM2 Default (Note: CF3 modules default is Pull up.)
X X 1 1 UIM1 Pull Up
X X 1 0 UIM1 Pull down
X X 0 1 UIM1 No pull
X X 0 0 UIM1 Default (Note: CF3 modules default is Pull up.)