AirPrime WP8548 / WP75xx / WP76xx / WP77xx AT Command Reference
80
Proprietary and Confidential - Contents subject to change
4118047
!MAPUART
Map services to UART
Map services to the module’s physical UARTs.
Note that a reset is required for the change to take effect.
Password required:
No
Reset required to apply changes:
Yes
Persistent across power cycles:
Yes
Usage:
•
Execution:
AT!MAPUART=<service>[,<uart>]
Response:
OK
Purpose:
Map the specfiied <service> to the specified <uart> (if no <uart> is
specified, UART1 is used).
•
Query:
AT!MAPUART?
Response:
!MAPUART: <service (UART1)>, <service (UART2)>
OK
Purpose:
Report the current mappings for both UARTs
•
Query List:
AT!MAPUART=?
Purpose:
Return the command format and the supported parameter values.
Parameters:
<service> (Service to map to a UART)
•
0—UART disabled
•
1—AT command service (Note: Not available for UART2)
•
2—Diagnostic Message (DM) service
•
3—Reserved
•
4—NMEA service
•
5–15—Reserved
•
16—Linux Console
•
17—Customer Linux application
<uart> (Physical UART)
•
1—UART1 (Default)
•
2—UART
Table 3-2: Modem Status Command Details (Continued)
Command
Description
