Sierra Wireless AirPrime WP75 Series, At Command Reference

Page: 20 / 300

AirPrime WP8548 / WP75xx / WP76xx / WP77xx AT Command Reference
20 Proprietary and Confidential - Contents subject to change 4118047
Memory Management Commands —Commands that control the data stored in
non-volatile memory of the modem.
GNSS Commands —Supported on GPS-enabled modems only.
!DALSTXPWR Set LTE Tx power level (LTE only) 172
!DALSWAVEFORM Set LTE TX waveform (LTE only) 173
!DASBAND Set frequency band 174
!DASCHAN Set modem channel (frequency) 175
!DASLNAGAIN Set LNA gain state 176
!DASPDM Set PDM value (WCDMA and GSM only) 177
!DASTXOFF Turn Tx PA off 177
!DASTXON Turn Tx PA on 178
!DAWGAVGAGC Return averaged Rx AGC value (WCDMA only) 178
!DAWSPARANGE Set PA range state machine (WCDMA only) 179
!DAWSSCHAIN Enable secondary receive chain (WCDMA only) 179
!DAWSTXCW Set waveform used by the transmitter (WCDMA only) 180
!DAWSTXPWR Set desired Tx power level (WCDMA mode only) 180
!LDTEST Test LED (WP8548/WP75xx) 181
!LDTESTOFF Reset LED to normal mode from test mode 182
!LEDTEST Test LED (WP76xx/WP77xx) 183
Table 1-5: Test Commands (Continued)
Command Description Page
Table 1-6: Memory Management Commands
Command Description Page
!RMARESET Restore device 186
Table 1-7: GPS Commands
Command Description Page
!GNSSCONFIG Configure GNSS satellite constellation support 189
!GNSSDPOMODE Enable/Disable Dynamic Power Optimization (DPO) 190
!GPSAUTOSTART Configure GPS auto-start features 191
!GPSCLRASSIST Clear specific GPS assistance data 192
!GPSCOLDSTART Clear all GNSS assistance data 193
!GPSEND End an active session 193