Rev.
6
Oct.18
Proprietary and Confidential - Contents subject to change
191
!GPSAUTOSTART
Configure GPS auto-start features
Configure the GPS auto-start features. Any changes take effect the next time the modem
is reset.
Note: If auto-start is enabled, another GPS session cannot be started.
Password required:
No
Reset required to apply changes:
Yes
Persistent across power cycles:
Yes
Usage:
•
Execution:
AT!GPSAUTOSTART=<function>[, <fixtype>, <maxtime>, <maxdist>,
<fixrate>]
Response:
OK
or
ERROR
Purpose:
Assign start values for various GPS settings
•
Query:
AT!GPSAUTOSTART?
Response:
!GPSAUTOSTART
function: <function>
fixtype: <fixtype>
maxtime: <maxtime> seconds
maxdist: <maxdist> meters
fixrate: <fixrate> seconds
OK
Purpose:
Display the current values for auto-start features
•
Query List:
AT!GPSAUTOSTART=?
Purpose:
Return the expected command format.
Parameters:
<function> (When GPS auto-start will occur)
•
0=Disabled
•
1=At bootup
•
2=When NMEA port opened
<fixtype> (Type of fix to establish)
•
1=Standalone (not supported by a mobile station)
•
2=MS-based only
•
3=MS-assisted only
<maxtime> (Maximum time to wait for a position fix)
•
Valid range: 1–255—Number of seconds to wait
<maxdist> (Requested accuracy of fix)
•
Entered in decimal format
•
Valid range:
•
1–4294967279 meters
•
4294967280=No preference
<fixrate> (Time to wait between fixes)
•
Valid range: 1–65535 seconds
Table 8-2: GPS Command Details (Continued)
Command
Description
