Siemens sitrans tr200, Operating Instructions Manual

Page: 38 / 78

Functions
8.1 General information
SITRANS TR200/TR300
38
Operating Instructions, 04/2007, A5E01071992-01
– The following information is read-only: Information whether the transmitter may be
operated in intrinsically safe mode or not. This function can only be performed using
the SIMATIC PDM parameterization software or with the HART communicator.
● Free material parameters: Fields for more detailed description of the sensor that is
connected
–
Type of the sensor
– Composition of the protective tube
– Length of the protective tube
– Screw thread / installation flange
– Supplier / manufacturer
– F no. of sensor
– Order no.
● Further parameterizable functions are:
–
Slave pointer functions
– Sensor calibration function with selectable trimming range within the limits of the
measuring range
– Calibrating the analog output: for SITRANS TR200 from 4 to 16 mA, for
SITRANS TR300 from 4 to 20 mA
– Factory reset: Resetting the operating data to the factory settings
– Simulation of measurement input. Only for SITRANS TR300: Electronic temperature
and analog output.
The operating data is stored in a non-volatile memory (EEPROM).