Siemens sitrans tr200, Operating Instructions Manual

Page: 76 / 78

Index
SITRANS TR200/TR300
76
Operating Instructions, 04/2007, A5E01071992-01
M
Maintenance, 61
Mean value connection, 43
Modem
RS232, 34
USB, 34
More information, 8
O
Offset
Measured value, 42
Operating functions, 39
P
Parameterization, 34
Special characteristic curve, 49
Parameterization software
SIMATIC PDM, 39
SIPROM T, 39
Precautions, 10
Product features, 12
Product information on the Internet, 8
Q
Qualified personnel, 9
S
Safe working regulations, 21
Scaled trim
Digital-to-analog converter, 47
Sensor
Terminal, 21
sensor calibration point
Trimming, 45
Sensor characteristic, 49
Sensor factor, 42
Sensor source, (Siehe Signalquelle)
Shift key, 37
Short-circuit monitoring, 41
Signal source, 11
Signal source
Resistance thermometer, 11
Signal source
Thermocouple, 11
Signal source
Potentiometer, 11
Signal source
Resistance-type sensor, 11
Signal source
DC voltage source, 11
Special characteristic curve
Calculation, 50
Parameterization, 49
System integration, 7
T
Test terminals, 21, 29
Three-wire input, 23
Trimming
Line resistances, 41
Lower sensor calibration point, 45
Sensor, 43
Upper sensor calibration point, 46
Two-wire connection, 23
Type of ignition protection
Limited energy nL (zone 2), 26
Type of ignition protection, 26
Type of ignition protection
Non-sparking nA (zone 2), 26
Type of ignition protection
Non-sparking nA (zone 2), 26
Type of protection
Intrinsic safety, 10
Limited energy nL (zone 2), 10
non-sparking nA (zone 2), 10
Type plate, 13
W
Working reliability regulation, 10
worldwide
Contact person, 8
Worldwide contact person, 8
Z
Zone 2, 10, 26