Siemens SITRANS LR250 PROFIBUS PA Operating Instructions Manual Download Page 12

Page: 12 / 94

Introduction

1.2 Firmware revision history

SITRANS LR250 (PROFIBUS PA)

Operating Instructions, 01/2014, A5E32221386-AB

1.2

Firmware revision history

This history establishes the correlation between the current documentation and the valid

firmware of the device.
The documentation of this edition is applicable for the following firmware:

Firmware

rev.

EDD rev.

Date

Changes

1.00.04

1.00.05

12 Jun 2007

•

Initial release.

1.01.00

23 Aug 2007

•

EDD

/SIMATIC PDM: improved rendering of

the echo profile and TVT.

1.01.01

26 Sep 2007

•

PNO certification release.

1.01.02

10 Jun 2008

•

Maintenance release for firmware and

EDD

1.01.02

1.01.03

17 Jun 2008

•

The internal EDD revision has been

incremented.

1.02.00

27 May 2009

•

Harmonization of menu structures and

parameter names across products.

•

Display indicates progress towards first

measurement.

1.02.01

1.02.00

7 June 2010

•

Display contrast improvement.

•

Antenna type parameter cannot be

modified.

1.02.02

1.02.00

24 May 2011

•

Threaded PVDF antenna supported.

1.02.03

1.02.01

31 Oct 2012

•

Antenna parameter removed.

•

Quickstart on local display enhancements.

Electronic Device Description

Summary of Contents for SITRANS LR250 PROFIBUS PA































































































Search results

Summary of Contents for SITRANS LR250 PROFIBUS PA

Reviews:

Related manuals for SITRANS LR250 PROFIBUS PA

Brands by name

Popular brands

Siemens SITRANS LR250 PROFIBUS PA, Operating Instructions Manual

Search results

Summary of Contents for SITRANS LR250 PROFIBUS PA

Reviews:

Related manuals for SITRANS LR250 PROFIBUS PA

Brands by name

Popular brands