Siemens SITRANS LR250 PROFIBUS PA Operating Instructions Manual Download Page 74

Page: 74 / 94

Remote operation

7.1 Operating via SIMATIC PDM

SITRANS LR250 (PROFIBUS PA)

Operating Instructions, 01/2014, A5E32221386-AB

TVT Shaper

Note
Double click on each axis to see the X scale and data scale values. Right-click or Left-click

on the axis and drag to reposition the scale.

This feature allows you to manually adjust the TVT to avoid false echoes caused by

obstructions. For an explanation see Auto False Echo Suppression (Page 207).
Open the menu Device – Echo Profile Utilities and click the tab TVT Shaper.

①

TVT

②

Cursor

③

Echo profile

●

Initial profile graph is blank upon entry to dialog. Click on Measure to view and upload the

current TVT from device.

●

Change the position of the cursor on the TVT using the Point+ and Point– buttons: raise and

lower the TVT using and Offset-.

●

Alternatively, enter values for Point and Offset directly into the dialog boxes.

●

Click on Transfer to Device.

Summary of Contents for SITRANS LR250 PROFIBUS PA































































































Search results

Summary of Contents for SITRANS LR250 PROFIBUS PA

Reviews:

Related manuals for SITRANS LR250 PROFIBUS PA

Brands by name

Popular brands

Siemens SITRANS LR250 PROFIBUS PA, Operating Instructions Manual

Search results

Summary of Contents for SITRANS LR250 PROFIBUS PA

Reviews:

Related manuals for SITRANS LR250 PROFIBUS PA

Brands by name

Popular brands