Remote operation
7.1 Operating via SIMATIC PDM
SITRANS LR250 (PROFIBUS PA)
80
Operating Instructions, 01/2014, A5E32221386-AB
4.
The Output value from the desired function block is displayed in PDM, and the LCD displays
the substitute value. See Simulate Output below, to set the output mode.
5.
After simulation is complete, disable simulation and click on Transfer.
Simulate output
1.
Open the menu Device – Simulation, select function block 1 or 2, and click on the tab
Simulation (Output).
2.
Select Manual Mode (from options AUTO, Manual, or Out of Service) and click on Transfer.
3.
Enter simulated value and click on Transfer.
4.
After simulation is complete, return to Simulate Output, reselect AUTO mode, and click on
Transfer.
