Siemens SITRANS LR250 PROFIBUS PA Operating Instructions Manual Download Page 14

Page: 14 / 94

Safety notes

2.3 CE Electromagnetic Compatibility (EMC) Conformity

SITRANS LR250 (PROFIBUS PA)

Operating Instructions, 01/2014, A5E32221386-AB

2.3

CE Electromagnetic Compatibility (EMC) Conformity

This equipment has been tested and found to comply with the following EMC Standards:

EMC Standard

Title

CISPR 11:2004/EN
55011:1998+A1:1999&A2:2002, CLASS B

Limits and methods of measurements of radio

disturbance characteristics of industrial,

scientific, and medical (ISM) radio-frequency

equipment.

EN 61326:1997+A1:1998+A2:2001+A3:2003

(IEC 61326:2002)

Electrical Equipment for Measurement, Control

and Laboratory Use – Electromagnetic

Compatibility.

EN61000-4-2:2001

Electromagnetic Compatibility (EMC) Part 4-

2:Testing and measurement techniques –

Electrostatic discharge immunity test.

EN61000-4-3:2002

Electromagnetic Compatibility (EMC) Part 4-3:

Testing and measurement techniques –

Radiated, radio-frequency, electromagnetic

field immunity test.

EN61000-4-4:2004

Electromagnetic Compatibility (EMC) Part 4-4:

Testing and measurement techniques –

Electrical fast transient/burst immunity test.

EN61000-4-5:2001

Electromagnetic Compatibility (EMC) Part 4-5:

Testing and measurement techniques – Surge

immunity test.

EN61000-4-6:2004

Electromagnetic Compatibility (EMC) Part 4-6:

Testing and measurement techniques –

Immunity to conducted disturbances, induced

by radio-frequency fields.

EN61000-4-8:2001

Electromagnetic Compatibility (EMC) Part 4-8:

Testing and measurement techniques – Power

frequency magnetic field immunity test.

Summary of Contents for SITRANS LR250 PROFIBUS PA































































































Search results

Summary of Contents for SITRANS LR250 PROFIBUS PA

Reviews:

Related manuals for SITRANS LR250 PROFIBUS PA

Brands by name

Popular brands

Siemens SITRANS LR250 PROFIBUS PA, Operating Instructions Manual

Search results

Summary of Contents for SITRANS LR250 PROFIBUS PA

Reviews:

Related manuals for SITRANS LR250 PROFIBUS PA

Brands by name

Popular brands