Siemens SITRANS FX300 Operating Instructions Manual Download Page 29

Page: 29 / 80

INSTALLATION

SITRANS FX300

www.siemens.com/flow

06/2009 - SFIDK.PS.050.F2.02 A5E02100423

3.6.2 Installing devices in flange design

•

Use bolts and fastening nuts

to attach the measuring device to one side of the flange.

•

While doing so, insert the gaskets

between measuring sensor and flange and align them.

•

Check that the gasket is concentric and that it is not protruding into the pipe cross-section.

•

Install the gasket, bolts and fastening nuts on the other side of the flange.

•

Align the measuring device and the gaskets so they are concentric.

•

Now tighten all nuts bit by bit alternately across the diagonal.

Figure 3-12: Installing devices in flange design

Gasket

Bolts with fixing nuts

MA_Siemens_Sitrans_FX300_R02_en_PRT.book Page 29 Monday, June 22, 2009 8:17 AM

Summary of Contents for SITRANS FX300

















































































Search results

Summary of Contents for SITRANS FX300

Reviews:

Siemens SITRANS FX300, Operating Instructions Manual, Page: 29 / 80

Search results

Summary of Contents for SITRANS FX300

Reviews: