manualshive.com logo in svg

Siemens SITRANS FX300, Operating Instructions Manual, Page: 11 / 80

Share
Download
Siemens SITRANS FX300 Operating Instructions Manual Download Page 11

 DEVICE DESCRIPTION 

2

11

SITRANS FX300

www.siemens.com/flow

06/2009 - SFIDK.PS.050.F2.02   A5E02100423

Device description

2.1  Scope of delivery

2.2  Instrument versions

The devices come in the following versions:

•

Converter with display

•

Blind device

•

Sensor in flanged design

•

Sensor in sandwich design

The following designs are available as options:

•

with pressure sensor

•

with isolation valve for the pressure sensor

INFORMATION!

Inspect the cartons carefully for damage or signs of rough handling. Report damage to the 
carrier and to the local office of the manufacturer.

INFORMATION!

Check the packing list to check if you received completely all that you ordered.

INFORMATION!

Look at the device nameplate to ensure that the device is delivered according to your order. 
Check for the correct supply voltage printed on the nameplate.

Figure 2-1: Scope of delivery

1  

Measuring device in ordered version

2  

Handbook

3  

Certificates, calibration report and parameter datasheet

4  

Bar magnet

MA_Siemens_Sitrans_FX300_R02_en_PRT.book  Page 11  Monday, June 22, 2009  8:17 AM

Summary of Contents for SITRANS FX300

















































































Reviews:

No comments