Siemens SITRANS FUH1010, Product Instruction Manual, Page: 92 / 264

Functions
7.2 Selecting Flow Units
FUH1010 IP65 NEMA 4X Precision Volume
Operating Instructions, 01/2013, A5E32122003-AA
91
Note
NETFLOW (default) is best for applications where there may be zero flow for long periods. It
minimizes false Totalizer register increments due to data scatter. Press the <Down Arrow> to
accept the default setting.
Selecting Totalizer modes
1. Press the <MENU> key and [Meter Type] will be highlighted.
2. Press the <Right Arrow> to [Dual Path Flow] and then press <ENTER>.
3. The [Dual Path Flow] menu with appear with [Chan/Path Setup] menu item highlighted.
4. Scroll down to the [Totalizer Mode] menu and press the <Right Arrow> to select the
Totalizer Mode option list.
)ORZ7RWDO8QLWV
6LHPHQV 'XDO3DWK>@3DWK
&KRRVHSRVLWYHQHJDWLYHRUQHWWRWDO
)ORZ9RO8QLWV *DOORQV86!
)ORZ7LPH8QLWV 0,1
)ORZ'LVS5DQJH $XWRUDQJH
)ORZ'LVS6FDOH *$/0,1
7RWDO9RO8QLWV *DOORQV86!
7RWDOL]HU6FDOH .*$/
7RWDO5HVROXWLRQ 1(*)/2:
7RWDOL]HU0RGH !1(7)/2:
%DWFK6DPSOH7RW 326)/2:
5. Press the <Up/Down Arrows> to select the desired mode.
6. Press <ENTER> to store selection.
Totalizer Mode Controls
From the RS-232 serial port all of the Totalizer commands listed below can be executed
using PC keyboard function keys via VT100 terminal key emulation.
Note
Si-Ware or HyperTerminal should be in the Data Display mode when invoking the function
keys referenced in the table below. Use the key sequence <Ctrl L> to display the Data
Display mode.